The option to charge your electric vehicle at home ensures that you are fuelled up and ready to move. Interestingly, the residential charging of electric vehicles is highly convenient and cost-effective. For this reason, most EV drivers carry 80 percent of their charge at home using a electric vehicle charger. Before embracing electric vehicle supply equipment (EVSE), several considerations ought to be factored in. If you are in a dilemma about an electric car charger installation, evaluate the following points.
1. How the Charger Works
If you already own an electric vehicle, you probably are aware of the basics behind its functions. However, you probably do not know how the chargers work. The charging device is located inside the bonnet of your vehicle, and for it to work, it has to be connected to an external home electric car charger point. The EVSE serves as a link between the power source and the EV charger. Some of these devices can be mounted on a wall, while others are mounted on a metal pole.
2. Featured Improvements
During the installation process, certain additions can be made to boost performance. The stations can be upgraded with a dedicated circuit efficient operation. They are popular because they are fast. Before purchasing, consult our professional technician to find out if your home has enough power supply to support the station or if modifications to your metering cabinet are needed.
3. The Power Needed
Most of the EV chargers on the market today need a minimum of 240 volts. Our professional installers know the power a station requires and the amount of power the system can output. Installing a device that will need more power than can be supplied may put your home at risk and eventually damage the charging station and the vehicle charger.
4. Best Installation Point
The EVSE should be located in the garage or the place where you park your vehicle. Most cables run between the length of 15 to 25 feet, so this should be put into consideration. If the setup has to be a distance from your vehicle, the installer may have to extend the cables.
What to Expect from the EV Charger
Some chargers are known to offer fast charging but will require a special home installation procedure. The circuit breaker has to be attached to 120-volts twice with the aim of doubling the voltage with the help of a 4-strand cable. The cable has to be insulated and appropriately secured before being moved to the charging station.
This will ensure that your electric system is protected from damage. The charging unit is then installed and attached to the 240-volt cable. Considering that this electric car charger home installation is technical with risks, it is highly critical that it is handled by a professional. Local building codes usually demand a permit, particularly because electric installations can cause material damage to a building.
With a charging system, you benefit from convenience. It means not worrying about losing charge when driving around. At night, you will only need to plug in, and your EV will be ready for a take-off in the morning. An electric vehicle can be charged as often as you need. It is not necessary to charge every night, but some drivers choose to top up each night for maximum flexibility. The other benefit you will enjoy is cut costs. Installing a home charger means you get to skip the charging fees to pay your electric bill. Researchers say that charging your EV at home costs less than running an air conditioner.
Charging your EV with an EVSE is fast but will need special equipment. The charging code should be stored securely to ensure it is not damaged. It also means assessing the charger’s parts to ensure they are not wearing.
The type 2 EVSE will offer you charging through its 240 V AC plug, adding between 10 and 60 miles of range per hour. If you have adequate electrical service in your residence, the electric car charger installation will be relatively cheap. Given that the installation is expected to comply with the national codes and regulations, be sure to work with a qualified and insured electrical engineer like 50five.
What to Expect in a Multi-Unit Charging System
Electric car charger home installation can be done in multi-unit dwellings such as condos. Property owners install the chargers to attract residents. This, however, requires a lot of considerations, including electric service access, parking area and legal issues.
Apartment considerations need to be factored in as well. It is about evaluating residence demand for the stations, the management, power infrastructure and the energy. You will need to figure out your budget and priorities and how the installation will increase the demand for your property. Where there are multiple residents using the EV charger, costs may be shared. The best EV charging station is one that is reliable, effective and convenient for all electric car models.
As electric vehicles grow in popularity, they are now generating demand changes for residences. Previously, home installations of EV chargers were considered impractical but are being embraced and are offering a lot of opportunities for drivers.
Geschreven door Joost Gerrits
Joost is a real EV enthusiast. He shares all his findings, news, tips and tricks through fun and informative blogs. In addition, you can find him every now and then on the 50five YouTube channel with cool videos!